How to Change Your Tire 01-05 Honda Civic

Difficulty: Beginner · About 30 min · Honda Civic

Change a flat tire on a 2001–2005 Honda Civic using the factory jack points, wheel chocks, and a compact spare for temporary use.

Steps

1. Secure the vehicle

   Move to firm, level ground away from traffic, switch on the hazards, set the parking brake, and select Park or a gear. Chock a wheel diagonally opposite the flat and retrieve the jack and spare.

2. Loosen the wheel fasteners

   With the flat tire still on the ground, loosen the lug nuts slightly in a crossing pattern. Do not remove them yet, and never place any part of your body beneath a vehicle supported only by its jack.

3. Raise and remove the wheel

   Position the jack at the marked lift point and raise the vehicle until the tire clears the ground. Remove the lug nuts, lift off the wheel, and place it flat under the vehicle as a backup.

4. Fit the spare

   Mount the spare over the wheel studs and start each lug nut by hand. Tighten them lightly in a star pattern, lower the vehicle until the tire contacts the ground, then snug the nuts in a crossing sequence.

5. Lower fully and secure tools

   Lower the vehicle completely and tighten the lug nuts to the vehicle specification with a torque wrench as soon as practical. Store the flat, jack, and tools, then follow the spare’s speed and distance limits.

Check your vehicle’s repair manual for exact specifications and fit.