How to Replace Dead Battery 05-10 Chrysler 300
Difficulty: Beginner · About 15 min · Chrysler 300
Replace a dead battery on a 2005-2010 Chrysler 300.
Tools you will need
- Socket extensions
- 10mm socket
- Ratchet
Parts and supplies
- Battery
Steps
- Remove the old battery
Disconnect the negative then positive cables with a 10mm wrench, remove the 10mm mounting bolt and the hold-down, then pull the battery out.
- Install the new battery
Set the tray into place, insert the hold-down, tighten the 10mm mounting bolt, then reconnect the positive cable followed by the negative.
Check your vehicle’s repair manual for exact specifications and fit.