How to Replace Ignition Coil Pack 90-11 Ford Ranger
Difficulty: Beginner · About 20 min · Ford Ranger
Replace the ignition coil pack on a 1990-2011 Ford Ranger.
Tools you will need
- 8mm socket
- 7mm socket
- Ratchet
Parts and supplies
- Ignition coil pack
Steps
- Remove the old ignition coil
Mark the plug wires so you know where each one goes, unplug them all, disconnect the wiring harness from the coil, then unbolt its two 7mm and two 8mm bolts.
- Install the new ignition coil
Mount the new coil and bolt it in, making sure the small resistor attached by the bolts seats back into the coil assembly, then plug the wires back in using your marks to match the original order.
Check your vehicle’s repair manual for exact specifications and fit.