How to Replace Grille 02-03 Nissan Maxima
Difficulty: Intermediate · About 4 min · Nissan Maxima
Replace the grille on a 2002–2003 Nissan Maxima by removing the bumper cover, releasing the grille tabs, then reconnecting lamp wiring and aligning the cover during installation.
Tools you will need
- 10mm Socket
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- Ratchet
Parts and supplies
- Replacement grille, if needed
Steps
Release the bumper cover
Remove the top and lower clips, then pull back each inner fender to reach its fasteners. Release the side-marker lamps and unplug their wiring, then disconnect the fog lamps.
Remove the grille
With the bumper supported, pull it forward and set it on a protected surface. Remove the grille nuts from behind, release its locking tabs, and lift the grille away.
Install the replacement grille
Align the grille tabs with the bumper openings and press them fully into place. Reinstall the retaining nuts evenly, checking that the grille sits flush.
Reinstall the bumper cover
Reconnect fog and side-marker wiring, align the cover with its side guides, and refit the inner fenders. Install the upper, lower, and side fasteners, then test the lamps.
Check your vehicle’s repair manual for exact specifications and fit.