How to Replace Windshield Wiper Arm 99-11 Volkswagen Jetta
Difficulty: Beginner · About 25 min · Volkswagen Jetta
Replace the front windshield wiper arms on a 1999–2011 Volkswagen Jetta by removing the splined arms, transferring blades if needed, and aligning them at the parked position.
Tools you will need
- 13mm socket and ratchet
- Pick tool
- Wiper arm puller
- Penetrating oil
Parts and supplies
- Windshield wiper arms
Steps
- Remove the wiper arm caps and nuts
Raise the hood and lift the caps from the wiper arm bases with a pick. Remove each 13mm nut and keep the hardware together.
- Release the old arms
Press down gently on each arm while working it off the splined post. Use penetrating oil or a wiper arm puller if it is stuck; avoid levering against the windshield.
- Transfer blades and position arms
Move the serviceable blades to the replacement arms if needed. Cycle the wiper motor to its park position, switch it off, and align each arm with the correct resting location.
- Secure and test the wipers
Install the 13mm nuts and tighten them to the vehicle's specification. Refit the caps, close the hood, and test a complete wiper cycle to verify the blades clear the trim and park correctly.
Check your vehicle’s repair manual for exact specifications and fit.