How to Replace Hood Lift Support 03-09 Volvo XC90

Difficulty: Beginner · About 20 min · Volvo Xc90

Replace a hood lift support on a 2003–2009 Volvo XC90 while keeping the hood securely supported throughout the repair.

Steps

1. Support the hood

   Have a helper hold the hood fully open or use a secure support before removing any strut. Do not rely on the remaining lift support to hold the hood.

2. Remove the old support

   Carefully pry the retaining clip at one end of the strut and release that end from its ball stud. Repeat at the other end and remove the support.

3. Install the new support

   Orient the replacement support to match the original and press its lower socket onto the ball stud until it locks. Attach the upper end the same way.

4. Replace the opposite support and verify

   Replace the other support if required while the hood remains supported. Confirm both ends are latched, then slowly check that the hood stays open.

Check your vehicle’s repair manual for exact specifications and fit.