How to Replace Front Interior Door Handle 00-07 Ford Focus Hatchback Coupe
Difficulty: Beginner · About 20 min · Ford Focus
Replace the front interior door handle on a 2000–2007 Ford Focus hatchback or coupe by transferring the latch cable and reconnecting the window-switch panel.
Tools you will need
- Flat Blade Screwdriver
- T20 Driver
Parts and supplies
- Front interior door handle
Steps
Remove the handle and switch panel
Switch off the ignition. Remove the T20 screw inside the door handle, then lift the window-switch panel with a trim-safe screwdriver and unplug its wiring harness. Release the handle from the door panel and disconnect the latch cable.
Transfer the latch cable
Release the latch cable end from the old handle and inspect the cable for fraying or a damaged retainer. Attach it to the replacement handle, making sure the cable end is fully seated and the sheath is captured.
Install and test the new handle
Press the replacement handle into the door panel until its retainers engage. Reconnect the window-switch wiring and snap the panel into place, then reinstall the T20 screw. Test the handle and window switch before closing the door.
Check your vehicle’s repair manual for exact specifications and fit.