How to Replace Rear Door Speaker 98-12 Ford Ranger Extended Cab
Difficulty: Beginner · About 3 min · Ford Ranger
Replace a rear door speaker in a 1998–2012 Ford Ranger extended cab by removing the interior panel, transferring the wiring connection, and checking audio before reassembly.
Tools you will need
- 15mm Socket
- T50 Socket
- Trim Tool Set
- Flat Blade Screwdriver
Parts and supplies
- Compatible rear door speaker
Steps
Remove the door panel
Pry off the upper seat-belt trim and remove its fastener. Release the door-panel clips around the edges, lift the panel upward, and set it aside without straining the wiring.
Disconnect and remove the speaker
Unplug the speaker lead and remove its mounting screws. Lift the speaker out and inspect the connector and surrounding panel for damage or moisture.
Install and test the replacement
Connect the vehicle wiring to the replacement speaker and secure it in the opening. Turn the audio on briefly to confirm sound before putting the panel back.
Refit the panel and belt trim
Route the seat belt through its guides, align the panel clips, and press each clip into place. Reinstall the belt fasteners to the vehicle specification and refit the trim covers.
Check your vehicle’s repair manual for exact specifications and fit.