How To Replace Rear Taillight 94-97 Honda Accord
Difficulty: Beginner · About 30 min · Honda Accord
Replace a rear taillight assembly or bulb on a 1994–1997 Honda Accord by opening the trunk access panel and reinstalling the lamp gasket and retaining hardware.
Tools you will need
- 8mm socket and ratchet
Parts and supplies
- Rear taillight assembly or bulb
Steps
- Open the lamp access panel
Open the trunk and turn the access-panel retainer to remove the panel behind the taillight. Reach the bulb holder and rotate it to release it from the housing.
- Replace a bulb if needed
Pull the old bulb straight from its socket and install the correct replacement without touching the glass. Refit and turn the socket until it locks into the lamp.
- Remove the taillight assembly
Unclip the wiring retainers and remove the four 8mm nuts. Pull the taillight outward carefully and inspect its gasket and mounting studs before fitting a new assembly.
- Install the replacement lamp
Transfer the gasket to the new taillight if required and align its studs with the body openings. Press the lamp evenly into place, install the four nuts, and reconnect the wire clips.
- Close the access and check lighting
Reinstall the bulb sockets and trunk access panel. Test the tail, brake, and turn signal functions to confirm the lamp and connectors work before closing the trunk.
Check your vehicle’s repair manual for exact specifications and fit.