How to Replace Headlight 98-11 Ford Crown Victoria

Difficulty: Beginner · About 20 min · Ford Crown Victoria

Replace the headlight assembly on a 1998-2011 Ford Crown Victoria.

Steps

1. Handle the new bulbs carefully

   Avoid touching the bulb's glass with your fingers, since skin oil can burn into it and foul the light; clean it with rubbing alcohol and a soft cloth if that happens.

2. Remove the plastic cover

   Pop and secure the hood, unscrew the three clips at the top, then pull the cover up and set it aside.

3. Remove the old headlight assembly

   Pull up the two tabs anchoring it, pull the assembly out, then unplug the wiring harness and bulbs.

4. Preliminarily aim the new headlight

   Match the adjuster screws on the new assembly to the same position as the old one.

5. Install the new headlight assembly

   Plug in the bulbs and harness, then push the assembly into place and press down the anchor tabs.

6. Reinstall the plastic cover

   Clip its six push clips back in.

Check your vehicle’s repair manual for exact specifications and fit.