How to Replace Fog Lights 11-18 Volkswagen Jetta
Difficulty: Intermediate · About 90 min · Volkswagen Jetta
Replace a fog lamp on a 2011–2018 Volkswagen Jetta by loosening the bumper cover for access. Keep the cover supported and test the lamp and connector before reinstalling trim.
Tools you will need
- Trim tool set
- T25 Torx driver
- Ratchet
Parts and supplies
- Fog lamp assembly
Steps
Loosen the bumper cover
Remove upper, lower, and wheel-well Torx fasteners, then release the liner tape as needed. Carefully pull the bumper corners from their guides without sharply bending the cover.
Remove the old fog lamp
Rotate the connector to release it, then remove the lamp fasteners and lift the assembly out. Inspect the connector and surrounding tabs for damage.
Install the replacement lamp
Align the locating tabs with the bumper opening and secure the fasteners evenly. Reconnect the bulb plug and confirm the lamp illuminates before closing access.
Secure the bumper cover
Press the cover into its side guides and reinstall wheel-well, lower, and upper fasteners. Reposition the liner tape and verify bumper alignment and lamp operation.
Check your vehicle’s repair manual for exact specifications and fit.