How to Replace Outer Tail Lights 07-13 Nissan Rogue
Difficulty: Beginner · About 20 min · Nissan Rogue
Replace the outer tail lights on a 2007-2013 Nissan Rogue.
Tools you will need
- 10mm socket
- Ratchet
- Trim tool set
Parts and supplies
- Tail light assembly
Steps
- Remove the tail light
Open the hatch, remove the housing's 10mm nuts, pry open the side trim with a flat blade screwdriver, disconnect the wiring harness, then pry the light out.
- Install the tail light
Feed the wiring harness and rubber grommet into the car, press the tail light onto the body and the reverse light into the hatch, tighten the 10mm nut, connect the harness, then press the trim back on.
Check your vehicle’s repair manual for exact specifications and fit.