How To Replace Exterior Door Handle 96-00 Honda Civic
Difficulty: Intermediate · About 35 min · Honda Civic
Replace an exterior door handle on a Honda Civic by reconnecting the latch and lock rods and verifying key and handle operation before reassembly.
Tools you will need
- 10mm Socket
- Ratchet
- Flat Blade Screwdriver
- Phillips Head Screwdriver
Parts and supplies
- Exterior door handle
Steps
Remove the door panel
Remove the inside handle screw and release its latch rod. Disconnect the lock and window-switch harnesses, remove the pull trim and screws, then lift the panel away.
Remove the exterior handle
Release the latch and lock rods from the handle. Remove the handle fasteners and lock-cylinder retainer, then withdraw the handle from the outside of the door.
Install the replacement handle
Position the new handle and reconnect the lock mechanism and rods. Install both mounting bolts and ensure each linkage clip is fully locked.
Test and reinstall trim
Test the key, lock, and latch with the door open. Reconnect the speaker and switch wiring, align the panel clips, and reinstall the screws, handles, and trim.
Check your vehicle’s repair manual for exact specifications and fit.