How to Replace Alternator 95-97 Honda Accord
Difficulty: Intermediate · About 60 min · Honda Accord
Replace the alternator on a 1995-1997 Honda Accord.
Tools you will need
- 12mm socket
- Socket extensions
- Flat blade screwdriver
- 14mm socket
- Anti-seize grease
- Telescoping magnet
- 10mm socket
- Ratchet
- Swivel
Parts and supplies
- Alternator
Steps
- Disconnect the battery
Disconnect the negative terminal with a 10mm wrench.
- Remove the old alternator
Loosen the engine pulling hook, unbolt its two 12mm bolts with a socket, ratchet, extension and flex joint, remove the 12mm nut and 14mm bolt holding the alternator, unbolt the wiring clip's 10mm bolt, disconnect the power leads with a 10mm socket and flat blade screwdriver, then loosen the tensioner and bracket bolts with a 10mm socket to release the serpentine belt (keeping the routing diagram handy).
- Install the new alternator
Apply white grease to the mounting surface, set the alternator in place and bolt in its 10mm, 12mm and 14mm hardware (tapping it with a rubber mallet if needed), reconnect the power leads with the 10mm socket, refit the serpentine belt following the diagram (checking its smooth side for cracks or fraying), tighten the tensioner and bracket bolts, then reconnect the negative battery terminal.
Check your vehicle’s repair manual for exact specifications and fit.