How to Replace Upper Grille 07-09 Toyota Camry

Difficulty: Intermediate · About 50 min · Toyota Camry

Replace the upper grille on a 2007–2009 Toyota Camry by removing the bumper cover and releasing the grille’s perimeter tabs.

Steps

1. Mark and remove the bumper

   Apply tape along the bumper edge to preserve its alignment. Remove splash-shield fasteners, release the wheel-liner retainers, and free the bumper from its upper brackets and side clips.

2. Release the upper grille

   With the bumper cover supported on a protected surface, remove the grille screws and press its retaining tabs inward. Lift the grille away without bending the plastic clips.

3. Install the replacement grille

   Align the new grille tabs with the bumper openings and press them in evenly. Reinstall the screws and check that the grille sits flush.

4. Reinstall the bumper

   Hang the bumper on its upper brackets and engage the side clips. Refit the splash shields and wheel-liner fasteners, then check that the original tape marks align.

Check your vehicle’s repair manual for exact specifications and fit.