How to Replace Side View Mirrors 98-01 Dodge Ram 1500

Difficulty: Beginner · About 50 min · Dodge Ram

Replace side mirrors on a 1998–2001 Dodge Ram 1500 and route the wiring so it cannot be trapped behind the mirror or reinforcement plate.

Steps

1. Remove the door panel

   Remove the handle and door pull fasteners, then release the panel clips with a trim tool. Unplug the switch and mirror connectors, and return any clips left in the door to the panel before setting it aside.

2. Remove the original mirror

   Remove the foam insert at the top of the door and unplug the mirror connectors. Support the mirror while removing its three nuts, then lift the assembly away from the door.

3. Install the replacement mirror

   Feed the harness through the door and reinforcement plate if fitted, then position the mirror on its gasket. Start the nuts by hand, tighten evenly to specification, reconnect the plugs, and reinstall the foam insert.

4. Reinstall the door panel and verify

   Reconnect the door harnesses and switches, align the panel over the lock, and press its clips into place. Reinstall its screws and handle bolt, then test mirror adjustment and window operation.

Check your vehicle’s repair manual for exact specifications and fit.