How to Replace Window Regulator 94-02 Dodge Ram 1500
Difficulty: Advanced · About 90 min · Dodge Ram 1500
Replace the front window regulator on a 1994–2002 Dodge Ram 1500 by supporting the glass, transferring the motor with care around spring tension, and testing operation before refitting the door panel.
Tools you will need
- Phillips Head Screwdriver
- Painter's Tape
- 10mm Socket
- Ratchet
- Trim Tool Set
Parts and supplies
- Front power window regulator
Steps
Remove the door panel and speaker
Switch off the ignition. Remove the door-pull and mirror-panel screws, release the panel clips, and lift the panel away. Unplug the mirror and window switches, remove the speaker screws, disconnect its harness, and set the speaker aside.
Secure the glass and remove the regulator
Loosen the glass fasteners, raise the window by hand, and secure it with painter's tape. Disconnect the window motor lead and remove the regulator fasteners. Withdraw the assembly while keeping clear of the spring-loaded motor and regulator arm.
Transfer the motor and fit the new regulator
With the regulator securely supported, transfer the motor to the new assembly while keeping hands clear of stored spring tension. Seat the motor fully and tighten its fasteners, then position the regulator in the door and install its mounting bolts.
Reattach the glass and test
Support the glass while removing the tape and lower it onto the regulator studs. Tighten its fasteners, reconnect the motor and speaker, and run the window through its full travel to confirm it moves smoothly and remains in its tracks.
Reinstall the door panel
Reconnect the switch and mirror wiring and clip the power switch into the panel. Route the harnesses, align the panel with the door, and press the clips into place. Reinstall the door-pull and mirror-panel screws, then test the window and locks.
Check your vehicle’s repair manual for exact specifications and fit.