How to Replace Rear Door Handle 09-14 Ford F-150
Difficulty: Intermediate · About 30 min · Ford F-150
Replace the rear door handle on a 2009–2014 Ford F-150 by removing the panel fasteners, transferring the latch cable, and securing the new handle in the panel.
Tools you will need
- Socket Extensions
- 6mm Socket
- 8mm Socket
- Ratchet
- Trim Tool Set
- Pick
Parts and supplies
- Rear door handle
Steps
Remove the rear door panel
Switch off the ignition. Release the handle-bolt cover and upper window trim, remove the 8 mm handle bolt and three 6 mm panel bolts, then lift out the window switch and unplug it. Raise the panel off its clips and disconnect the latch cable.
Release the old handle
Press the two handle retaining tabs and remove the handle from the panel. Inspect the panel opening and latch cable for broken clips or damage before installing the new part.
Install the replacement handle
Attach the latch cable to the replacement handle and press the assembly into the panel until both retaining tabs lock. Pull the cable lightly to confirm it is secured and the handle returns freely.
Reinstall the panel and check operation
Reconnect the switch harness and lower the panel onto its mounting clips. Reinstall the three 6 mm bolts, the 8 mm handle bolt, and the window switch and trim. Test the handle and window before closing the door.
Check your vehicle’s repair manual for exact specifications and fit.