How To Replace Rear Inside Door Handle 01-06 Hyundai Elantra
Difficulty: Beginner · About 35 min · Hyundai Elantra
Replace the rear interior door handle on a 2001–2006 Hyundai Elantra by removing the door panel, reconnecting its latch cables, and testing the window and handle.
Tools you will need
- Phillips screwdriver
- Flat blade screwdriver
- Trim panel tool
Parts and supplies
- Rear interior door handle
Steps
- Remove the rear door panel
Release the end and door-pull trim, then remove the exposed Phillips screws. Pry off the handle bezel, free the panel clips, lift the panel away, and unplug the window switch harness.
- Remove the old handle
Remove the handle's Phillips screw and disconnect its latch cables from their retainers. Release the handle from the panel and set it aside with the fastener.
- Install the replacement handle
Position the new handle in the panel opening and secure it with its Phillips screw. Attach the latch cables to their matching points and confirm both clips are seated.
- Reassemble and test the door
Reconnect the window switch and hang the panel on the door. Press its clips into place, reinstall all screws and trim, then test the inside handle, lock, and window operation.
Check your vehicle’s repair manual for exact specifications and fit.