How to Replace Mirror 00-02 GMC Yukon
Difficulty: Beginner · About 20 min · Gmc Yukon
Replace the side mirror on a 2000–2002 GMC Yukon by removing the inner corner trim, unplugging the wiring, and securing the replacement mirror with three bolts.
Tools you will need
- Socket Extensions
- 10mm Socket
- Ratchet
Parts and supplies
- Side view mirror assembly
Steps
Remove the inside mirror trim
Switch off the ignition and open the door. Carefully release the small corner trim panel at the upper front of the door to expose the mirror connector and fasteners.
Disconnect and remove the old mirror
Unplug the mirror wiring connector and support the mirror from outside. Remove its three 10 mm mounting bolts, then guide the mirror away from the door and out through the opening.
Install the replacement mirror
Route the replacement mirror lead through the opening and position the mirror against the door. Install and tighten the three mounting bolts evenly, then reconnect the electrical harness.
Refit trim and verify operation
Align the inside corner trim and press its clips into place. Turn on the ignition and confirm the mirror adjusts correctly, then check that the mirror base is secure and the trim sits flush.
Check your vehicle’s repair manual for exact specifications and fit.