How to Replace Front Brakes 11-14 Honda Odyssey

Difficulty: Advanced · About 90 min · Honda Odyssey

Replace the front pads and rotors on a 2011–2014 Honda Odyssey and check pedal feel and fluid level before driving.

Steps

1. Lift the vehicle and remove the wheel

   Loosen the wheel nuts slightly while the tire is on the ground, chock the rear wheels, then raise and support the front securely. Remove the wheel and inspect the brake hose and caliper for damage or fluid seepage.

2. Remove the pads and rotor

   Remove the caliper fasteners and support the caliper with a hanger so its hose is not loaded. Remove the pad clips and pads, then remove the bracket and rotor fasteners to lift the rotor off the hub.

3. Prepare the hub and fit new parts

   Clean rust from the hub face and pad slides, inspect the caliper pins, and use brake-safe lubricant sparingly on specified contact surfaces. Mount the new rotor, reinstall the bracket and new pads, and confirm the wear indicator is correctly oriented.

4. Retract the piston and reinstall the caliper

   Use an old pad and clamp to retract the piston slowly while monitoring the reservoir level. Seat the caliper over the new pads and tighten its fasteners to the vehicle specification, then reinstall the wheel and tighten its nuts to specification.

5. Verify brake operation

   Pump the pedal until firm before moving the vehicle and check brake fluid level. Test at walking speed in a safe location and stop if braking feels uneven, the pedal sinks, or a leak appears.

Check your vehicle’s repair manual for exact specifications and fit.