How to Replace Hood Latch 14-19 Toyota Tundra
Difficulty: Intermediate · About 3 min · Toyota Tundra
Replace the hood latch on a 2014–2019 Toyota Tundra by removing the grille, transferring the release cable and electrical connector, and verifying the safety catch works.
Tools you will need
- 12mm Socket
- 10mm Socket
- Ratchet
- Flat Blade Screwdriver
- Trim Tool Set
Parts and supplies
- Compatible hood latch assembly
Steps
Remove the grille
Open the hood and remove the grille bolts and push clips. Release the lower locating tabs and lift the grille away from the latch area.
Disconnect and remove the latch
Unplug the latch connector and release the cable end from the mechanism. Remove the latch bolts and unclip its wiring from the support.
Install the replacement latch
Connect the release cable and electrical plug, then position the latch on its mounting points. Tighten the fasteners evenly and secure the wiring clips.
Reinstall grille and verify
Press the grille into its clips and reinstall its bolts. Test the primary release and secondary safety catch before driving.
Check your vehicle’s repair manual for exact specifications and fit.