How to Replace Fog Lights 03-08 Honda Pilot

Difficulty: Intermediate · About 60 min · Honda Pilot

Replace the fog-light assemblies on a 2003–2008 Honda Pilot by removing the bumper cover and transferring the wiring connections to the new lamps.

Steps

1. Remove the bumper cover

   Open the hood and release the radiator-cover clips. Remove the wheel-well and lower bumper fasteners, free the side tabs, then support the cover as it comes forward and unplug the fog lamps.

2. Remove the old fog lamps

   Set the bumper on a padded surface. Release each lamp’s clips and screws, then lift the assemblies out without damaging their wiring retainers.

3. Fit the replacement lamps

   Connect the correct bulb socket or transfer the existing one as required by the replacement. Seat each lamp into the bumper and secure its screws and retaining clips.

4. Reinstall the bumper cover

   Reconnect the fog-light harnesses and align the bumper with its brackets. Press the side and upper clips into place, then reinstall the lower shield, wheel-well fasteners, and radiator cover.

5. Verify the lights

   Turn on the fog lamps and confirm both illuminate. Check that the bumper and lamps are secure and that the beams are aimed properly.

Check your vehicle’s repair manual for exact specifications and fit.