How to Replace Intake Tube 98-12 Ford Ranger 4.0L V6
Difficulty: Beginner · About 25 min · Ford Ranger
Replace the intake tube on a 1998–2012 Ford Ranger with the 4.0L V6 by loosening both clamps and reseating the tube between the throttle body and airbox.
Tools you will need
- Flat blade screwdriver
- Phillips screwdriver
- 7 mm socket
Parts and supplies
- Engine intake tube
Steps
Remove the throttle-body cover
With the engine off and cool, remove the cover fasteners and lift the cover away. Keep the screws together and avoid disturbing nearby wiring or vacuum lines.
Remove the old intake tube
Loosen the clamps at both ends of the tube and ease it away from the throttle body and airbox. Inspect the mating lips for cracks or debris before installing the replacement.
Install the replacement tube
Place the new tube over both openings and seat it fully without twisting or pinching any attached hose. Align the clamps behind the retaining lips and tighten them securely.
Reinstall and inspect
Return the throttle-body cover and reinstall its fasteners. Check that the tube is sealed at both ends and no hoses or wiring are trapped before starting the engine.
Check your vehicle’s repair manual for exact specifications and fit.