How To Replace Side Rear View Mirror 01-06 Hyundai Elantra
Difficulty: Beginner · About 25 min · Hyundai Elantra
Replace the side mirror on a 2001–2006 Hyundai Elantra by protecting the mirror-base trim, transferring its retaining clip, and checking the electrical adjustment.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- 10mm Wrench
- 10mm Socket
- Ratchet
- Cloth Rags
Parts and supplies
- Side rear view mirror assembly
Steps
Remove the mirror-base trim
Switch off the ignition and open the door. Wrap a flat screwdriver with a cloth to protect the paint, then carefully pry off the mirror-base trim and unplug the mirror harness. Remove the yellow retaining clip and keep it for reuse.
Remove the original mirror
Support the mirror from outside the door while removing its three 10 mm mounting bolts and the Phillips screw. Guide the mirror assembly away from the door without dropping fasteners inside the panel.
Install the replacement mirror
Transfer the yellow retaining clip to the trim piece. Position the replacement mirror and start its mounting bolts by hand, then tighten them evenly and reinstall the Phillips screw. Reconnect the mirror wiring harness.
Refit trim and test the mirror
Press the mirror-base trim into place until its clips engage. Turn on the ignition and test mirror adjustment, then check that the assembly is stable and the paint and trim around its base are undamaged.
Check your vehicle’s repair manual for exact specifications and fit.