How to Replace Grille 99-02 GMC Sierra 2500
Difficulty: Beginner · About 2 min · Gmc Sierra
Replace the grille on a 1999–2002 GMC Sierra 2500 by removing the hood shroud, transferring the badge, and ensuring all grille retainers are locked.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- 10mm Socket
- Ratchet
- Needle nose pliers
Parts and supplies
- Replacement grille, if damaged
Steps
Remove the hood shroud and grille
Open the hood and release the shroud clips. Remove the grille fastener and its plastic retainers, then pull the grille forward from its locating points.
Transfer the badge
Release the badge tabs from the old grille and move the badge to the replacement. Align the tabs with their slots and press the emblem into place.
Install the new grille
Fit the grille clips into their openings and seat the panel evenly against the truck. Reinstall the center fastener and side clips.
Restore the shroud
Position the hood shroud and press its clips fully into place. Check the grille is secure and does not contact the hood when closed.
Check your vehicle’s repair manual for exact specifications and fit.