How To Replace Remove Front Bumper Cover Hyundai Elantra 01-06
Difficulty: Beginner · About 45 min · Hyundai Elantra
Remove and replace the front bumper cover on a 2001–2006 Hyundai Elantra, disconnecting the lamps before moving the cover and aligning all clips and fasteners during reassembly.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- 10mm Socket
- Ratchet
Parts and supplies
- Front bumper cover
- Bumper cover clips
Steps
Remove the grille
Release the grille fasteners along the top and inside the opening. Pull the grille forward from its locating tabs and set it aside without bending the plastic.
Disconnect the front lamps
Remove the headlamp mounting bolts and unplug each harness before lifting the lamps out. Release the parking lamps carefully and disconnect their connectors.
Release and remove the bumper cover
Remove the wheel-well screws, inner bumper fasteners, and top and lower clips. Pull the cover forward evenly from both sides, checking for any attached wiring before carrying it away.
Fit the replacement cover
Align the replacement cover with the fenders and mounting points before pressing any clips into place. Reconnect the parking lamps, install the wheel-well screws and bumper fasteners, and check that the panel gaps are even.
Reinstall the headlamps and grille
Reconnect the headlamp harnesses and secure the lamps with their original bolts. Align the grille tabs and reinstall its clips, then verify the lamps work and the bumper cover is firmly retained.
Check your vehicle’s repair manual for exact specifications and fit.