How to Replace Outer Liftgate Trim 07-14 Honda Fit
Difficulty: Beginner · About 20 min · Honda Fit
Replace the outer liftgate trim on a Honda Fit while removing the rear wiper arm carefully and restoring all clips and interior panels.
Tools you will need
- 8mm Socket
- 10mm Socket
- Ratchet
- Pry Bar
Parts and supplies
- Outer liftgate trim panel
- Replacement retaining clips, if broken
Steps
Remove the rear wiper arm
Lift the wiper arm trim cap, remove the retaining nut, and pull the arm from its splined shaft. Set it aside without bending the arm.
Release the liftgate trim
Remove the interior liftgate panel and the exposed trim screw. Release the outer panel clips evenly with a trim-safe pry tool and lift the trim away.
Install the replacement trim
Align the replacement panel with the liftgate holes and press its clips into place. Install the retaining screw and refit the interior trim and latch cover.
Reinstall and test the wiper
Align the wiper arm with its original park position and tighten its nut to specification. Replace the cover and test the rear wiper before closing the liftgate.
Check your vehicle’s repair manual for exact specifications and fit.