How to Replace Rear Brakes 02-18 Nissan Altima
Difficulty: Intermediate · About 50 min · Nissan Altima
Service the rear pads and rotors on a Nissan Altima, inspecting wear and restoring a firm brake pedal before driving.
Tools you will need
- Floor Jack
- Jack Stands
- 14mm Socket
- 19mm Socket
- Brake Parts Cleaner
- Torque Wrench
Parts and supplies
- Rear brake pads
- Rear brake rotors, if worn
Steps
Lift and inspect
Loosen the wheel fasteners on the ground, raise and support the car, then remove the wheel. Check pad thickness and inspect the rotor for deep grooves or damage.
Remove the caliper and rotor
Back off the caliper fastener and ease the caliper from the rotor without straining the hose. Support the caliper, remove its bracket, and slide off the rotor.
Install the replacement parts
Clean the new rotor and seat it on the hub. Refit the bracket to the vehicle specification, retract the caliper piston carefully, install the pads, and secure the caliper.
Refit the wheel and verify operation
Reinstall the wheel and tighten its fasteners to specification in a crossing pattern. Pump the brake pedal until firm, then verify braking at low speed in a safe area.
Check your vehicle’s repair manual for exact specifications and fit.