How To Replace Front Side Marker Light 92-96 Ford F-150/250/350
Difficulty: Beginner · About 30 min · Ford F-150
Replace a front side marker light assembly or bulb on a 1992–1996 Ford F-150, F-250, or F-350, keeping the socket and lamp wiring properly seated.
Tools you will need
- Phillips screwdriver
- 10mm socket
- 11mm socket
- Ratchet
Parts and supplies
- Front side marker light assembly or bulb
Steps
Remove the lamp assembly
Remove the two 10mm mounting nuts and the upper Phillips screws securing the adjacent headlamp assembly. Move the lamp assembly forward enough to access the side marker.
Replace the bulb if needed
Twist the bulb socket counterclockwise and remove it from the lamp. Pull the bulb straight out, install a matching replacement, and lock the socket back into place.
Remove the side marker
Remove the two 11mm fasteners securing the side marker and lift the lamp from its opening. Keep the wiring clear of the mounting surface.
Install and secure the replacement
Position the replacement side marker and reinstall its two 11mm nuts. Refit the adjacent lamp assembly and its 10mm and Phillips fasteners.
Test the light
Turn on the parking lights and confirm the side marker illuminates. Check that the lamp sits evenly and all fasteners are secure.
Check your vehicle’s repair manual for exact specifications and fit.