How to Replace Ignition Coil Pack 01-04 Ford Escape
Difficulty: Beginner · About 20 min · Ford Escape
Replace the ignition coil pack on a 2001-2004 Ford Escape.
Tools you will need
- Flat blade screwdriver
- Ratchet
- T25 Torx driver
Parts and supplies
- Ignition coil pack
Steps
- Remove the old ignition coil
Disconnect its wiring harness, remove its four T25 bolts, transfer the spark plug wires to the same spots on the new coil, then remove the old coil.
- Install the new ignition coil
Feed the T25 bolts through it, insert it into place, tighten the four bolts, connect the wiring harness, then push the spark plug wires down into place.
Check your vehicle’s repair manual for exact specifications and fit.