How to Replace Rear Window Switch 06-10 Ford Explorer
Difficulty: Beginner · About 20 min · Ford Explorer
Replace the rear window switch on a 2006–2010 Ford Explorer by releasing the switch trim, disconnecting the plug, and securing the replacement in the door panel.
Tools you will need
- Trim panel tool
Parts and supplies
- Rear window switch
Steps
- Remove the switch trim
Use a trim tool to release the small panel beside the rear window switch. Lift the switch from its opening and disconnect the electrical harness by releasing its lock.
- Remove the old switch
Release the switch from its retainer with a trim tool, working gently so the surrounding door panel is not marked or cracked.
- Install the replacement switch
Seat the new switch in its retainer and reconnect the wiring harness until its lock engages. Align the panel with the door and press it into place.
- Reinstall trim and test
Press the small trim piece into its clips and test the rear window switch through its full range. Confirm the switch sits flush and operates smoothly.
Check your vehicle’s repair manual for exact specifications and fit.