How to Replace Electric Fuel Pump 97-06 Toyota Camry
Difficulty: Intermediate · About 70 min · Toyota Camry
Replace the electric fuel pump on a 1997–2006 Toyota Camry through the rear-seat service opening, transferring the pump into its sender housing and checking for leaks after priming.
Tools you will need
- Socket Extensions
- Flat Blade Screwdriver
- 8mm Socket
- Ratchet
Parts and supplies
- Electric fuel pump
- Fuel strainer
- Fuel pump seals
Steps
Prepare the fuel system and access cover
Work in a well-ventilated area away from sparks and flames. Relieve fuel pressure using the vehicle's procedure, disconnect the negative battery cable, remove the rear seat cushion, and lift the fuel pump service cover.
Remove the fuel sender assembly
Unplug the sender wiring and remove its bracket fasteners. Disconnect the fuel line carefully, catch any residual fuel, remove the sender cover bolts, and lift the assembly out without bending the float arm.
Transfer the pump and strainer
Separate the sender housing and unplug the old pump. Move the seal, adapter, strainer, and retaining clip to the replacement pump as required, then secure the pump and reconnect its wiring.
Reinstall the sender assembly
Check the tank opening and seal for debris, then seat the sender gasket correctly. Lower the assembly into the tank, align its cover, tighten the fasteners evenly, reconnect the fuel line and wiring, and reinstall the service cover.
Prime and check the system
Refit the rear seat, reconnect the battery, and cycle the ignition several times to prime the pump. Start the engine and inspect the sender cover and fuel connection for leaks before driving.
Check your vehicle’s repair manual for exact specifications and fit.