How to Replace Windshield Washer Reservoir 01-07 Ford Escape
Difficulty: Intermediate · About 65 min · Ford Escape
Replace the windshield washer reservoir on a Ford Escape, transferring pumps and wiring before refilling with washer fluid and testing spray.
Tools you will need
- 10mm Socket
- Phillips Head Screwdriver
- Flat Blade Screwdriver
- Drain Pan
- Ratchet
Parts and supplies
- Windshield washer reservoir
- Washer fluid
Steps
Loosen the bumper cover
Remove the grille fasteners and clips at the wheel wells and lower edge. Disconnect any fog lamp wiring, then release the bumper cover with help and set it aside safely.
Drain and remove the reservoir
Place a pan below the washer bottle, unplug its pump connectors, and drain the washer fluid. Release the pumps, remove the reservoir bolts, and lower the bottle out.
Install the new reservoir
Transfer the pumps and seals to the new bottle, position it in the vehicle, and reinstall its fasteners. Reconnect both electrical plugs and refill with windshield washer fluid.
Reinstall the bumper and test
Reconnect fog lamps, align the bumper cover, and reinstall its clips and bolts. Operate the washer system and inspect for leaks before driving.
Check your vehicle’s repair manual for exact specifications and fit.