How to Replace Mirror 04-09 Dodge Durango
Difficulty: Intermediate · About 40 min · Dodge Durango
Replace a side mirror on a 2004–2009 Dodge Durango by removing the front door panel, disconnecting the mirror plug, and reconnecting switches and latch hardware.
Tools you will need
- 10mm socket and ratchet
- Phillips screwdriver
- Flat blade screwdriver
Parts and supplies
- Side view mirror
Steps
- Remove the door panel
Lift the switch panel and unplug its connectors. Remove the handle and lower panel screws, release the door lock rod clip, and lift the panel away from the door.
- Remove the old mirror
Disconnect the mirror harness and remove its three 10mm retaining nuts. Support the mirror from outside the door while lifting it away from the panel.
- Install the replacement mirror
Route the replacement harness through the door and align the mirror studs with their openings. Start all three nuts by hand, tighten them securely, and reconnect the mirror plug.
- Reassemble and check operation
Reconnect the switch-panel wiring and door lock rod, then align and press the door panel into place. Reinstall its screws and trim, test the mirror controls, and confirm the lock and handle work.
Check your vehicle’s repair manual for exact specifications and fit.