How to Replace Ignition Coil 00-06 Toyota Tundra
Difficulty: Beginner · About 15 min · Toyota Tundra
Replace an ignition coil on a 2000-2006 Toyota Tundra.
Tools you will need
- 10mm socket
- Ratchet
Parts and supplies
- Ignition coil
Steps
- Remove the old ignition coil
Remove its 10mm bolt, twist and pull it up and out, then disconnect its electrical connector.
- Install the new ignition coil
Connect the electrical connector, press the coil into place, then tighten its 10mm bolt.
Check your vehicle’s repair manual for exact specifications and fit.