How to Replace Inner Taillights 11-17 Toyota Camry
Difficulty: Beginner · About 30 min · Toyota Camry
Replace an inner taillight assembly on a 2011–2017 Toyota Camry by removing the trunk liner, disconnecting the lamp, and restoring all trim clips after installation.
Tools you will need
- 10mm socket and ratchet
- Trim panel tool
Parts and supplies
- Inner taillight assembly
Steps
- Remove the trunk liner
Open the trunk and release the liner clips with a trim tool. Fold the liner aside to expose the inner taillight mounting bolts and electrical connector.
- Disconnect and remove the lamp
Disconnect the lamp harness and remove its 10mm mounting bolts. Lift the inner taillight assembly out of the trunk opening without pulling on its wiring.
- Install the replacement taillight
Place the new assembly into its opening and reconnect the harness. Align the mounting points and tighten the 10mm bolts securely without overtightening the housing.
- Reinstall liner and test
Return the trunk liner to position and press each clip into its hole. Test the tail and brake lamps before closing the trunk.
Check your vehicle’s repair manual for exact specifications and fit.