How to Remove Front Upper Grille 07-10 Hyundai Elantra
Difficulty: Intermediate · About 4 min · Hyundai Elantra
Replace the upper grille on a 2007–2010 Hyundai Elantra by removing the bumper cover, transferring the fog-lamp connectors, and securing the cover tabs and air collector.
Tools you will need
- Flat Blade Screwdriver
- Phillips Bit in a Ratchet
- Plastic Fastener Remover
- 7mm Socket
- 10mm Socket
- Ratchet
Parts and supplies
- Replacement upper grille
Steps
Release the bumper cover
Remove the air collector fasteners, upper retainers, and fender-corner screws. Unplug fog lamps if equipped and release lower splash-shield clips.
Remove the grille
Pull the bumper cover from its side and headlamp locking tabs. Remove the grille screws from behind the cover and lift the grille away.
Install the replacement grille
Position the new grille from the front of the bumper cover and reinstall its screws evenly. Confirm the grille sits flush before refitting the cover.
Reinstall bumper components
Seat the cover in its side guides, reconnect fog lamps, and refit the air collector. Reinstall fender, upper, and lower retainers, then check panel alignment.
Check your vehicle’s repair manual for exact specifications and fit.