How to Remove Bumper 08-12 Ford Escape
Difficulty: Beginner · About 3 min · Ford Escape
Remove and reinstall the front bumper cover on a 2008–2012 Ford Escape, supporting the vehicle safely and reconnecting the fog lamps before securing its shields and retainers.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- Jack Stands
- Ratchet
- Floor Jack
- Trim Tool Set
Steps
Remove the upper shield and wheel fasteners
Park on level ground, open and secure the hood, then release the radiator shield clips. Raise the vehicle at approved points and support it on stands before removing lower splash-shield fasteners.
Disconnect lamps and release the cover
Lower the splash shield and unplug the fog lamps if equipped. Release the wheel-well locks and grille or headlamp clips, then pull both cover corners outward from their guides.
Remove and position the bumper
With a helper supporting the cover, lift it clear of the vehicle and place it on a padded surface. Check the mounting guides and retainers for damage before refitting.
Secure and inspect the cover
Align the cover and press its sides into the guides. Reconnect fog lamps, refit the grille clips, wheel-well fasteners, splash shield, and radiator shield, then inspect panel gaps.
Check your vehicle’s repair manual for exact specifications and fit.