How to Replace Rear Shock Absorbers 05-14 Chrysler 300

Difficulty: Intermediate · About 45 min · Chrysler 300

Replace the rear shock absorbers on a Chrysler 300, transferring the upper mount correctly and aligning the lower bolts without forcing them.

Steps

1. Raise the vehicle and remove a wheel

   Loosen the lug nuts on the ground, raise and support the vehicle, then remove the wheel for access to the shock mounts.

2. Remove the old shock

   Remove the upper mount bolts and compress the shock enough to free it. Remove the lower fastener, withdraw the shock, and transfer the upper mount if needed.

3. Install the replacement shock

   Assemble the upper mount and washers in the original order. Position the shock, align its lower eye with the control arm, and start all fasteners by hand.

4. Tighten and reinstall

   Tighten the shock mounts to the vehicle specification, then refit the wheel and torque its lug nuts in a crossing pattern. Repeat on the opposite side.

Check your vehicle’s repair manual for exact specifications and fit.