How to Replace Interior Door Handle 96-00 Dodge Caravan
Difficulty: Beginner · About 3 min · Dodge Caravan
Replace the interior door handle on a 1996–2000 Dodge Caravan by removing the panel and water shield, transferring the latch cables, and checking the handle before reassembly.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- Window Crank Removal Tool
- Door Panel Removal Tool
Parts and supplies
- Compatible interior door handle
Steps
Remove the door panel
Release the manual window crank with the correct tool, then remove the handle and pull trim screws. Release the panel clips, lift the panel away, and disconnect the latch cables.
Expose the handle
Peel the water shield back carefully to reach the handle. Remove its retaining screws and lift the old handle out without damaging the cable ends.
Install the replacement handle
Position the new handle in the panel and secure its screws. Reconnect the latch cables to the correct levers and confirm they move freely.
Restore the panel and test
Reattach the water shield, align the panel, and press its clips home. Reinstall the screws and crank, then open and close the door with the panel handle to verify operation.
Check your vehicle’s repair manual for exact specifications and fit.