How to Change Headlight Turn Signal Marker Bulbs 07-11 Honda CR-V

Difficulty: Beginner · About 20 min · Honda Cr-v

Replace the headlight, turn signal, and side marker bulbs on a 2007-2011 Honda CR-V.

Steps

1. Remove the headlight bulb

   Disconnect the wiring harness, remove the rubber boot from the headlight, press the release tab on the metal retainer, then pull the bulb socket out.

2. Install the headlight bulb

   Insert the new H4 or 9003 bulb, close the retainer, place the boot back on, then reconnect the wiring harness.

3. Remove the turn signal bulb

   Twist it counterclockwise and pull it out of the socket.

4. Install the turn signal bulb

   Insert the new T6 amber bulb into the socket, then turn it clockwise to lock it in.

5. Remove the side marker bulb

   Twist it counterclockwise and pull it out of the socket.

6. Install the side marker bulb

   Insert the new 194 bulb into the socket, then turn it clockwise to lock it in.

Check your vehicle’s repair manual for exact specifications and fit.