How to Replace Headlights 06-08 Honda Civic
Difficulty: Intermediate · About 60 min · Honda Civic
Replace a headlight assembly or bulbs on a 2006–2008 Honda Civic by removing the front bumper cover and transferring its connectors and bracket.
Tools you will need
- 10 mm socket and ratchet
- T35 Torx driver
- Trim tool
- Phillips screwdriver
Parts and supplies
- Compatible headlight assembly or bulbs
Steps
Remove the bumper cover
Switch off the lights and ignition, release the lower splash-shield clips and upper radiator-shield retainers, and remove the fasteners at the wheel-well edges. Carefully release the bumper sides and remove the cover.
Remove the headlight
Remove the headlight and bracket fasteners, pull the assembly forward, and disconnect its wiring plug. Keep the connector and harness clear of the body opening.
Service bulbs or transfer the lamp
For bulb service, unplug the old bulbs and install matching replacements without touching halogen glass. For a new housing, transfer the required bracket and bulb sockets in their original orientation.
Install and reconnect
Reconnect the wiring and align the headlight with its mounting holes. Secure the bracket and lamp fasteners, then confirm the assembly sits evenly in the fender opening.
Refit the bumper and test
Reinstall the bumper cover, radiator shield, and splash-shield retainers. Test low and high beams and check headlight aim before driving at night.
Check your vehicle’s repair manual for exact specifications and fit.