How to Replace Rear Door Panel 99-05 Volkswagen Jetta
Difficulty: Beginner · About 45 min · Volkswagen Jetta
Remove and reinstall a rear door panel on a 1999–2005 Volkswagen Jetta, reconnecting the lock wiring, window switch, and latch cables.
Tools you will need
- Flat blade screwdriver
- T20 driver
- Phillips screwdriver
- Trim panel tool
Steps
- Remove the trim and fasteners
Pry off the door pull trim and remove the two Phillips screws inside the handle. Remove the two T20 fasteners at the lower panel edge.
- Release the panel and connectors
Work a trim tool around the panel to release its clips, then lift the panel upward. Disconnect the window switch, door lock harness, and latch cables before setting it aside.
- Reconnect the door panel
Reconnect the latch cables, window switch, and lock wiring. Align the panel with the door and press its clips into their retainers.
- Secure and test the panel
Reinstall the lower T20 screws and the two handle screws, then refit the door pull trim. Test the window, lock, and interior handle.
Check your vehicle’s repair manual for exact specifications and fit.