How to Replace Rear Window Switch 14-17 Subaru Crosstrek
Difficulty: Intermediate · About 40 min · Subaru Crosstrek
Replace the rear power window switch on a 2014–2017 Subaru Crosstrek by removing the door panel, releasing the switch from its housing, and reconnecting the latch cables.
Tools you will need
- Phillips screwdriver
- Flat blade screwdriver
- Trim panel tool
Parts and supplies
- Rear window switch
Steps
- Remove the rear door panel
Release the handle covers and remove the door-pull screw. Free the panel clips with a trim tool, lift the panel upward, disconnect the window harness, and unhook the handle cables.
- Remove the old window switch
Remove the Phillips screw retaining the switch and release its tabs. Lift the switch from the panel and separate it from its housing without bending the connectors.
- Install the replacement switch
Press the new switch into its housing and align the assembly with the door panel. Reinstall the retaining screw and confirm the switch sits flush.
- Reconnect panel and verify window
Reconnect the power window plug and latch cables, then fit the door panel over its clips. Reinstall the screws and trim covers and test the rear window operation.
Check your vehicle’s repair manual for exact specifications and fit.