How To Replace Rear Interior Door Handle 00-05 Buick LeSabre
Difficulty: Intermediate · About 40 min · Buick Lesabre
Replace a rear interior door handle on a 2000–2005 Buick LeSabre by removing the door panel, transferring the latch rods, and resealing the water shield.
Tools you will need
- 10mm socket and ratchet
- Phillips screwdriver
- Flat blade screwdriver
- Door panel removal tool
Parts and supplies
- Rear interior door handle
Steps
- Remove door panel and water shield
Release the handle bezel and courtesy lamp, unplug its connector, and remove the screw behind the reflector. Free the panel clips, lift the panel away, disconnect the window switch, and carefully peel back the water shield.
- Remove the old interior handle
Remove the 10mm handle bolt and slide the handle back. Release the latch rods from their retainers and detach them from the handle.
- Install the replacement handle
Attach the latch rods to their matching points on the new handle and secure their clips. Slide the handle forward into position and reinstall its 10mm bolt.
- Reassemble and test the door
Reinstall the water shield so it seals against the door, then reconnect the switch and courtesy lamp. Align the panel, press its clips in, refit trim and screws, and test the latch and window.
Check your vehicle’s repair manual for exact specifications and fit.