How to Replace Power Steering Pump 96-00 Honda Civic
Difficulty: Intermediate · About 70 min · Honda Civic
Replace the power steering pump on a 1996–2000 Honda Civic, transferring the pulley and belt before refilling with the specified fluid and bleeding air from the system.
Tools you will need
- 12mm Socket
- Power Steering Fluid
- 1/2 Inch Ratchet
- 19mm Socket
- Drain Pan
- 10mm Socket
- Ratchet
- Cloth Rags
- Needle nose pliers
Parts and supplies
- Power steering pump
- Honda-compatible power steering fluid
Steps
Remove the old power steering pump
Place a drain pan beneath the pump and remove its upper mounting fasteners. Disconnect the pressure and return hoses, cap openings to limit spills, loosen the pump adjusters, and remove the belt and pump.
Transfer the pulley
Hold the pulley using an appropriate method and loosen its retaining nut. Move the pulley to the replacement pump, align it correctly, and secure the nut to the vehicle's specification.
Install the replacement pump
Position the pump and install its upper and lower mounting bolts loosely. Fit the belt, tension it to the specified deflection, then tighten the pump fasteners and reconnect both hoses and the clamp.
Refill and bleed the steering system
Fill the reservoir with the specified Honda-compatible fluid. With the cap off as directed, start the engine briefly and turn the steering from side to side without holding against the stops; recheck the level and inspect for leaks.
Check your vehicle’s repair manual for exact specifications and fit.