How to Replace Side Mirrors 06-11 Toyota Camry
Difficulty: Beginner · About 30 min · Toyota Camry
Replace a side mirror on a 2006–2011 Toyota Camry by removing the interior trim, unplugging the mirror, and sealing the replacement base with its foam gasket.
Tools you will need
- 10mm socket
- Ratchet and extensions
- Flat blade screwdriver
Parts and supplies
- Side view mirror
Steps
- Remove the mirror trim
Carefully release the interior trim at the mirror base. Move it aside to expose the mounting nuts and electrical connector.
- Remove the old mirror
Unplug the mirror harness and support the mirror from outside. Remove the three 10mm nuts and guide the mirror away from the door.
- Prepare and fit the replacement
Remove the protective caps from the new mirror studs and apply its foam seal to the base. Feed the connector through the opening, connect it, and align the studs with the door.
- Secure and test the mirror
Install the three mounting nuts and tighten them evenly. Press the base trim into place, then test mirror movement if powered and confirm the base sits flush.
Check your vehicle’s repair manual for exact specifications and fit.