How to Replace Headlight Assembly 2009-11 Honda FIT
Difficulty: Intermediate · About 60 min · Honda Fit
Replace a headlight assembly on a 2009–2011 Honda Fit by removing the bumper cover and transferring the mounting bracket and lamp connectors.
Tools you will need
- Phillips screwdriver
- 10 mm socket and ratchet
- Trim tool
Parts and supplies
- Compatible headlight assembly and bulbs if required
Steps
Remove the bumper cover
Switch off the lights and ignition, then release the wheel-well, lower, and upper shield clips. Ease the bumper sides from their retainers and remove the cover with help, disconnecting fog-light plugs if equipped.
Remove the headlight
Remove the assembly fasteners and pull the headlight forward. Unplug the connectors and keep the harness clear of the bracket and body edges.
Transfer the bracket
Remove the mounting bracket from the old assembly and attach it to the replacement in the same orientation. Transfer compatible bulbs if needed and check that the seals are in place.
Install the new assembly
Reconnect the lamp harnesses and align the locating points. Secure the headlight fasteners evenly, then reconnect any fog lamps and refit the bumper clips and screws.
Test and align the lights
Test all headlight and fog-light functions. Check beam aim on a level surface and use the Honda aiming procedure or professional adjustment if the pattern is off.
Check your vehicle’s repair manual for exact specifications and fit.