How to Replace Tail Light Bulbs 04-09 Subaru Outback
Difficulty: Beginner · About 20 min · Subaru Outback
Replace the tail light bulbs on a 2004-2009 Subaru Outback.
Tools you will need
- Gloves
- Socket extensions
- Phillips head screwdriver
- Ratchet
- Trim tool set
Parts and supplies
- Tail light bulb
Steps
- Remove the tail light
Remove its Phillips screws, pop its clips out with a flat blade screwdriver, pop up the cover, remove its bolts with a 10mm socket, then pull it straight back.
- Service the bulbs
Twist the bulb socket counterclockwise out of the light, pull the bulb off, push the new one on, then twist the socket clockwise back in — the side marker is a 194 peanut bulb, the brake light a 7443 dual-filament bulb, and the turn signal a 7440 amber bulb.
- Install the tail light
Line up its pins with the car's clips, slide it into place, tighten its 10mm bolts, press the cover back on, then press in its clips and Phillips screws.
Check your vehicle’s repair manual for exact specifications and fit.